Sign In | Join Free | My frbiz.com
China Shaanxi Aipu Solids Control Co., Ltd logo
Shaanxi Aipu Solids Control Co., Ltd
Aipu Solids Control-All your solutions on solids control
Active Member

5 Years

Home > Mud Gas Separator >

High Pressure Vertical Mud Gas Separator 1400mm

Shaanxi Aipu Solids Control Co., Ltd

High Pressure Vertical Mud Gas Separator 1400mm

Brand Name : AIPU Solids

Model Number : APMGS1400

Certification : API, ISO

Place of Origin : China

MOQ : 1 set

Payment Terms : L/C, T/T

Supply Ability : 20 Sets per month

Delivery Time : 2 week

Packaging Details : Plywood pallets wrapped with film

Name : Choke Manifold Downstream Poor Boy Degasser Mud Gas Separator APMGS1400

Installation : Vertical

Material : Carbon steel

Vessel diameter : 1400mm (Optional)

Flow rate : 280-360m3/h

Storage Conditions : -50° +50°C

Application : Oil and gas drilling, on shore platform

After-sales service provided : In time and professional. Spare parts in stock

feature : high-pressure

Contact Now

Vertical Installation Mud Gas Separator 360m3/H High-Pressure

What's the role of poor boy degasser in solids control system? Poor boy degasser is used before shale shaker. If the drilling fluids was found to be invaded by dangerous gas through a testing device, drilling mud will flow into the poor boy degasser to process first through the choke manifold.

Poor boy degasser is also called mud gas separator is the first stage professional equipment to treat the gas invade mud. It is mainly used to remove the big bubbles with a diameter of more than 3mm. Most of these bubbles are the expanded gas filled in the drilling fluid in the annular of the wellbore. It would cause a good kick if not removed in a timely.

Poor boy degasser is located downstream of the choke manifold and is vertically installed near the shale shaker.

The height and diameter of an atmospheric separator are critical dimensions that affect the volume of gas and fluid the separator can efficiently handle. As the mud and gas mixture enters the separator, the operating pressure is atmospheric plus pressure due to friction in the gas vent line. The vertical distance for the inlet to the static fluid level allows time for additional gas break-out and provides an allowance for the fluid to rise somewhat during the operation to overcome friction loss in the mud outlet lines. As shown in Figure 39, the gas-fluid inlet should be located approximately at the midpoint of the vertical height. This provides the top half for a gas chamber and the bottom half for gas separation and fluid retention. The 30 in. diameter and 16 ft minimum vessel height requirements have proven adequate to handle the majority of gas kicks. The separator inlet should have at least the same ID as the largest line from the choke manifold which is usually 4 in. Some separators use tangential inlet, which creates a small centrifugal effect on the gas-fluid mixture which causes faster gas break-out.

Poor boy degasser APMGS1400

Model APMGS1400
Vessel diameter 1400mm
Flow rate 280-360 cubic meters per hour
Inlet line 5"
Discharge line 12"
Vent line 8"
Color AIPU color

APMGS800 means the poor boy degasser is holding a vessel diameter of 800mm. It is a more popular model than other degassers. The treating capacity is up to 260m³/h. The degassing efficiency is up to 95%.

With mud separators, there are two main types. Also known as a ‘poor-boy’ and a ‘gas buster’, the more common of the two is called an atmospheric mud/gas separator. However, some mud/gas separators are designed to operate at moderate backpressure. Although these will mostly operate under 100 psig, it’s possible to come across those that work at the atmospheric gas vent line pressure plus the vent line friction drop.

Main configuration of degasser APMGS800

The vessel diameter of the mud gas separator is 1000mm, the inlet and discharge line is 5'', 8''. While the gas vent line is 8''. The overall dimension of the whole degasser is about 2000x2000x6000mm. The vessel material is made of special carbon steel Q345R to resist the H2S. and it can be stored at -50° to +50°

one complete poor boy degasser including degasser body, skids, pipelines, safety valves, and pressure gauge. Some customers may request counter flanges and seals, we can provide these spares against requirements.

The mud gas separator is made of a steel sheet that thicks 10mm for normal pressure working conditions. Some of the degassers are made of steel sheets thick 14-20mm per different working pressure requirements. The pipelines and the valves will be different from normal pressure degasser as well.

The mud outlet line must be designed to handle viscous, contaminated mud returns. As shown in Figure 39 an 8 in. line is recommended to minimize frictional losses. This line is recommended to minimize frictional losses. The line usually discharges into the mud ditch in order that good mud can be directed over the shakers and untreatable mud routed to the waste pit.

During well control operations, the main purpose of a mud gas separator is to vent the gas and save the drilling fluid. This is important not only for economic reasons but also to minimize the risk of circulating out a gas kick without having to shut down to mix additional mud volume. In some situations, the amount of mud lost can be critical when the surface volume is marginal and on-site mud supplies are limited. When a gas kick is properly shut-in and circulated out, the mud gas separator should be capable of saving most of the mud.

Why do we need the mud gas separator?

For oil and gas well drilling, we usually set mud gas separators ahead of shale shakers. The drilling mud out of the well-bore will flow into the degasser via the chock manifold. After degassed, fluid will flow out of the degasser into a shaker by pass or possum belly. Degasser will help get rid of large quantity invading gas. These are harmful and toxic gas may lead to blow out

Especially when we drill the gas well at the gas field. The degassing is very important to safety working. We use the poor boy degasser and vacuum degasser together to control the gas volume entrained in drilling fluids and remove them efficiently.

Application of poor boy degasser APMGS1400

Poor boy degasser will work with flare ignition device to burning the discharged gas 30 or longer distance away. The flare ignition device will connect with degasser with gas vent line, the flare ignition device is non return valve, ignitor, junction box and control panel with cable. AIPU Solids Control is one of the leading manufacturer for mud gas separator, flare ignition device as well as other drilling mud process equipment like shale shaker, mud cleaner with cyclone and shaker, centrifuge, etc.

Is there another type or model poor boy degasser?

Yes. There are APMGS1200, APMGS1000. The difference is the diameter of the line's diameter and the vessel thickness. Based on working conditions, there are normal pressure degasser and middle pressure, high-pressure degasser. And the working pressure can be 0.1Mpa to 6.4Mpa, or even higher according to practical condition.

Besides the normal standard poor boy degasser, there are some degassers that can be customized. For example, we have made the APMGS500, APMGS600 degassers for clients request smaller degasser and smaller flow rate. Please feel free to let us know the requirement of your degasser.

There is a customizable configuration of the mud leg. That means the U tuber or mud seal length for a degasser. The mud seal will help to prevent gas flowing out of the degasser during operation. For the degasser leg and base, we can configure it as the adjustable one. That means the laydown leg and the supporting base can be configured flexibly.

For any question or demand, please feel free to contact AIPU solids. You will get a free offer on an optimal solution, you will get a professional proposal very soon.

High Pressure Vertical Mud Gas Separator 1400mm


Product Tags:

Vertical Natural Gas Filter Separator

      

High Pressure Fuel Gas Filter Separator

      

1400mm Oil Gas Separator

      
China High Pressure Vertical Mud Gas Separator 1400mm wholesale

High Pressure Vertical Mud Gas Separator 1400mm Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Shaanxi Aipu Solids Control Co., Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 

Friendly Links: www.everychina.com

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Help

Copyright © 2009 - 2024 frbiz.com. All rights reserved.